Possible a transparent Tab-Aerea in Folders ?
Possible a transparent Tab-Aerea in Folders ?
Hello,
using a Folder-Background-Color, the Tab-Area doesn't
look nice, because it is not transparent.
Is it possible, to make it transparent like shown ?
Regards
Uwe
using a Folder-Background-Color, the Tab-Area doesn't
look nice, because it is not transparent.
Is it possible, to make it transparent like shown ?
Regards
Uwe
Since 1995 ( the first release of FW 1.9 )
i work with FW.
If you have any questions about special functions, maybe i can help.
i work with FW.
If you have any questions about special functions, maybe i can help.
I Hope this helps.
Using ResEd 2.2
On my RC:
Take note of WS_EX_TRANSPARENT
My Tab kinda blend with dialog's background
Using ResEd 2.2
On my RC:
Code: Select all
...
CONTROL "",903,"SysTabControl32",WS_CHILD|WS_VISIBLE|WS_CLIPSIBLINGS|WS_CLIPCHILDREN|WS_TABSTOP|TCS_TOOLTIPS|TCS_MULTILINE|TCS_FLATBUTTONS,109,0,237,314,WS_EX_TRANSPARENT
...
My Tab kinda blend with dialog's background
Last edited by fraxzi on Sat Dec 20, 2008 5:04 am, edited 1 time in total.
Kind Regards,
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Dear Fraxzi,
Are you able to use ResEd with FWH without any problems. Till now I have not used any resource editors. I am planning to use a resource editor.
In this forum most are using Borland Resource Workshop (BRW) and most of the Sample .Rc files are made using BRW.
BRW looks very old. What's your openion about ResEd ?. I have also found another freeware ResEdit.
Regards
Anser
Are you able to use ResEd with FWH without any problems. Till now I have not used any resource editors. I am planning to use a resource editor.
In this forum most are using Borland Resource Workshop (BRW) and most of the Sample .Rc files are made using BRW.
BRW looks very old. What's your openion about ResEd ?. I have also found another freeware ResEdit.
Regards
Anser
anserkk wrote:Dear Fraxzi,
Are you able to use ResEd with FWH without any problems. Till now I have not used any resource editors. I am planning to use a resource editor.
In this forum most are using Borland Resource Workshop (BRW) and most of the Sample .Rc files are made using BRW.
BRW looks very old. What's your openion about ResEd ?. I have also found another freeware ResEdit.
Regards
Anser
Dear Anser,
I abandoned BRW due to inability to handle 32bit bitmap... looks (old ). I am currently enjoying Resource Editor (ResEd 2.2) it has better interface... small foot-print too without issues with FWH811 (or FWH24)
I'm also using PellesC Resource Compiler for that too without any issue.
I hope you use and enjoy ResEd too. It's FREE.
Regards,
Last edited by fraxzi on Mon Dec 22, 2008 12:58 am, edited 1 time in total.
Kind Regards,
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
anserkk wrote:Dear Fraxzi,
I need one more clarification
I am using BCC 5.5 compiler, xHarbour which is bundled along with FWHI'm also using PellesC Resource Compiler for that too without any issue.
Do I have to use PellesC to use ResEd 2.2 with FWH ?
Regards
Anser
YES. brc32.exe (Borland's Resource Compiler) doesn't know how to handle 32bpp (alpha blended) images which I require to some apps I made.
You can use other Resource Compiler which can handle 32bpp image.
Regards,
Kind Regards,
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Dear Fraxzi,
If so, what are the other options for the Resource Compiler.
I don't know whether I am asking a very stupid question.
Compile PRG's with Harbour/xHarbour,
Compiling C code with Borland C,
Compile Resource with another Resource Compiler,
Finaling Linking and build Exe using Borland C
Regards
Anser
Can I use other Resource Compiler along with BCC. I mean by just replacing the below given Line in my .rmk file to change the resource compiler to some other app and the rest without any changeYou can use other Resource Compiler which can handle 32bpp image.
Code: Select all
MyApp.res : MyApp.rc
$(BCDIR)\bin\brc32.exe -r WinAcs.rc
I don't know whether I am asking a very stupid question.
Compile PRG's with Harbour/xHarbour,
Compiling C code with Borland C,
Compile Resource with another Resource Compiler,
Finaling Linking and build Exe using Borland C
Regards
Anser
Yes you can use other resource compiler along with BCC and replace your script.anserkk wrote:Dear Fraxzi,
Can I use other Resource Compiler along with BCC. I mean by just replacing the below given Line in my .rmk file to change the resource compiler to some other app and the rest without any change
If so, what are the other options for the Resource Compiler.Code: Select all
MyApp.res : MyApp.rc $(BCDIR)\bin\brc32.exe -r WinAcs.rc
Using Borlands BCC55 and PellesC Resource Compiler, I am using this on my xMate:
Code: Select all
D:\PellesC\Bin\PORC.EXE %RC% /I D:\pellesc\include /I D:\pellesc\include\win
We all asked stupid questions... its a start of the coding sessionI don't know whether I am asking a very stupid question.
Compile PRG's with Harbour/xHarbour,
Compiling C code with Borland C,
Compile Resource with another Resource Compiler,
Finaling Linking and build Exe using Borland C
Regards
Anser
I think your sequence is correct.
Regards,
Kind Regards,
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Frances
Fivewin for xHarbour v18.07
xHarbour v1.2.3.x
BCC 7.3 + PellesC8 ( Resource Compiler only)
ADS 10.1 / MariaDB
Crystal Reports 8.5/9.23 DE
xMate v1.15
Dear Fraxzi,
Thankyou for clarifying my doubts
I assume that you are using Pelles C 32 bit version 5.00.1 ?
When I Googled, I found the following sites to download Pelles C
1) http://www.smorgasbordet.com/pellesc/
2) http://www.christian-heffner.de/
It's a Freeware
I am using the .rmk file distributed along with the FWH
\FWH\makes\bormake.zip and modified to use it with xHarbour
Now I will have to paly with the .rmk to include Pelles C as the resource compiler.
Hope it will be simple and work just replacing the line
with
Regards
Anser
Thankyou for clarifying my doubts
I assume that you are using Pelles C 32 bit version 5.00.1 ?
When I Googled, I found the following sites to download Pelles C
1) http://www.smorgasbordet.com/pellesc/
2) http://www.christian-heffner.de/
It's a Freeware
I am using the .rmk file distributed along with the FWH
\FWH\makes\bormake.zip and modified to use it with xHarbour
Now I will have to paly with the .rmk to include Pelles C as the resource compiler.
Hope it will be simple and work just replacing the line
Code: Select all
MyApp.res : MyApp.rc
$(BCDIR)\bin\brc32.exe -r MyApp.rc
Code: Select all
rem D:\PellesC\Bin\PORC.EXE MyApp.Rc /I D:\pellesc\include /I D:\pellesc\include\win
PCDIR=c:\PellesC
MyApp.res : MyApp.rc
$(PCDIR)\bin\PORC.EXE MyApp.Rc /I $(PCDIR)\include /I $(PCDIR)\include\win
Anser