OT: Multiedit

User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

OT: Multiedit

Post by Otto »

Does someone know where to setup:
File specification and Starting path in the search window?
Thanks in advance
Otto

Image
User avatar
Eugeniusz Owsiak
Posts: 60
Joined: Fri Oct 07, 2005 5:38 am
Location: Poland

Post by Eugeniusz Owsiak »

Otto.

Tools->Customize->Search->File Find->Starting Path

regards Eugeniusz
User avatar
Antonio Linares
Site Admin
Posts: 37481
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain
Contact:

Post by Antonio Linares »

Otto,

I recommend you to review UEStudio:
http://www.ultraedit.com/index.php?name=Content&pid=150

I was a multiedit user until I found UEStudio. It is excellent and very friendly :-)
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

Post by Otto »

Thank you Eugeniuzs. I never found this setup-window.
Thanks again.

@Antonio
I tried ultraedit but at the moment I don't see any adantage for me.
I use ME since the DOS-version ...
User avatar
TimStone
Posts: 2536
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA
Contact:

Editor

Post by TimStone »

Antonio,

I also use Multi-Edit. With the xBase add on that is included, it does a great job with .prg files ( and virtually anything else ). It also has an included file compare ( line by line ) utility that is excellent. Formatting is important, and it works well.

I have also used it since the DOS version and have looked at ( and tried ) other editors, but none provide a reason to switch.

Tim
Tim Stone
http://www.MasterLinkSoftware.com
timstone@masterlinksoftware.com
Using: FWH 19.06 with Harbour 3.2.0 / Microsoft Visual Studio Community 2019
User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

Post by Otto »

Hello Tim,
thank you for your answer.
Last Sunday I spend some time on the macro possibilities ME has and I tried to find out how ME does the editing of TAGs in htm view.
Do you think this could be done with prg-files, too?

Another question:
Many times I have to convert data from other formats to dbf. It would be fine if you could go from column to column and press a key and a macro would write the position to the place (see example: Pos1 18, Pos2 27 …). Sometimes clients have databases with more than 100 columns. Then you could extract this line and you could create very easy a dbf-structure programmatically.
Do you think this could work?

1 19940226 45023 Sehr geehrter Herr Herrn Liebmann
Pos1 18 Pos2 27 Pos3 43 Pos4 74 Pos5 91
1** 19930212 123 Liebe Familie Familie Adebahr
A 19950313 6057HR Sehr geehrte Damen und Herren Firma Alpine May
FXA 20060603 111596 Sehr geehrter Herr Herrn Fischer
M 19950603 63874 Sehr geehrter Herr Herrn Aber

Regards,
Otto
User avatar
TimStone
Posts: 2536
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA
Contact:

Macros

Post by TimStone »

Thats probably a post that would get answers on the Multi-Edit forum. They have a whole section on Macros. I only use the keystroke Macro recorder which is not working in Vista ... but they are trying to fix it.

Go to www.multiedit.com and under support look at the forum. There is a section for Macros and I'll bet you will get an immediate reply on how to handle that issue.

Tim
Tim Stone
http://www.MasterLinkSoftware.com
timstone@masterlinksoftware.com
Using: FWH 19.06 with Harbour 3.2.0 / Microsoft Visual Studio Community 2019
User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

Post by Otto »

Thank you, Tim. I post this question on the ME forum.
Regards,
Otto
User avatar
TimStone
Posts: 2536
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA
Contact:

Ultra Edit questions

Post by TimStone »

Antonio,

I found your list for highlighting, reserved words and that works ( I'm taking another look at UE ).

Here are a couple of questions:

1) Multi-Edit has a nice Comment capability that allows us to display a recorded macro for placing a comment table above a function. Does UE have a similar capability ?

2) I noticed the FUNCTION list. However, the only functions it adds are those in the format FUNCTION abc( ) and if the ( ) is not included, it doesn't show it on the list. I did a cut and paste of your list from another thread ( for the word file ). Is there a way to get it to recognise FUNCTION abc ?

Tim
Tim Stone
http://www.MasterLinkSoftware.com
timstone@masterlinksoftware.com
Using: FWH 19.06 with Harbour 3.2.0 / Microsoft Visual Studio Community 2019
User avatar
Antonio Linares
Site Admin
Posts: 37481
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain
Contact:

Post by Antonio Linares »

Tim,

1) UEStudio has macros support but I have never used them :-)

2) Add this to wordlist.txt:
/Function String 4 = "%*^{Function^}^{Method^}*"

Notice that there is no a ( at the end
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
James Bott
Posts: 4654
Joined: Fri Nov 18, 2005 4:52 pm
Location: San Diego, California, USA
Contact:

Post by James Bott »

Tim

>1) Multi-Edit has a nice Comment capability that allows us to display a recorded macro for placing a comment table above a function. Does UE have a similar capability ?

Yes, UE has macros and templates. You can define a section of text and insert it. I use this to insert a complete header to each PRG with date and time automatically inserted. I also have another template that inserts a basic report, then I just modify to suit.

There is another program, Texter, that does a similar thing, but with all applications. You define a few characters that trigger a replacement when you press Tab. You can use to to insert date and time, a word, or even whole paragraphs. I find it really useful. It is free. Check it out here:

http://lifehacker.com/software//lifehac ... 238306.php

James
User avatar
TimStone
Posts: 2536
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA
Contact:

Macro

Post by TimStone »

I guess I would need to study the Macro routine in UE. I can click on a function and it builds the header with the name, defined fields, date of revision, etc. It used to update nicely but that has not been working recently. Vista did throw ME some curves.

They advertised multiple monitor support but its not documented and apparently doesn't let me move documents outside of the window to another monitor. This is one thing nice about Word ... you can open two documents, put one on the other monitor, and compare text. I am enjoying the use of more screen "real estate". That is truly a nice feature I started using in Vista.
Tim Stone
http://www.MasterLinkSoftware.com
timstone@masterlinksoftware.com
Using: FWH 19.06 with Harbour 3.2.0 / Microsoft Visual Studio Community 2019
User avatar
James Bott
Posts: 4654
Joined: Fri Nov 18, 2005 4:52 pm
Location: San Diego, California, USA
Contact:

Post by James Bott »

Tim,

>I guess I would need to study the Macro routine in UE. I can click on a function and it builds the header with the name, defined fields, date of revision, etc. It used to update nicely but that has not been working recently. Vista did throw ME some curves.

I don't think it will do what you describe. What do you mean by "defined fields" and "date of revision?" Do you mean a list of vars used? Revision date of the PRG or of the function inside the PRG?

Since I always declare all vars used in a fuction or method as locals, that is already documented for me. And the last revision is the file date so I don't need that either. I document most of my changes to an existing PRG at the top of the PRG in a header there and I can auto-insert the current date and time with a UE macro or Texter.

>They advertised multiple monitor support but its not documented and apparently doesn't let me move documents outside of the window to another monitor. This is one thing nice about Word ... you can open two documents, put one on the other monitor, and compare text. I am enjoying the use of more screen "real estate". That is truly a nice feature I started using in Vista.

Hmm, do you mean opening different MDI child windows on different monitors? Can't you just run multiple copies of the editor?
User avatar
TimStone
Posts: 2536
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA
Contact:

Ultra Edit / Multi Edit

Post by TimStone »

To be clearer:

I have a Comment button that runs a macro / template that inserts a header at the highlighted Function or at the top of the PRG ( or Class, or Procedure, or Method ). It is part of Evolve which comes with Multi - Edit. It puts in the Function name automatically ( or the file name at the top of the PRG ), a title Description: ( and prompts for the detail ), the date ( which updates if you click on the function line again ), the calling routine ( prompts for the details ), any parameters ( listed ), the return value , and you can add more ( like notes ), etc. The format is user modifyable. I looked at Ultra Edit and it doesn't have the same range of values that can be automatically inserted. It does name of a file, date, and some other information, but most of what this includes is not apparently retrieveable in Ultra Edit.

I'm still looking at it ... some features are nice, but its actually forcing me to look more closely at what I can do in Multi-Edit.

Tim
Tim Stone
http://www.MasterLinkSoftware.com
timstone@masterlinksoftware.com
Using: FWH 19.06 with Harbour 3.2.0 / Microsoft Visual Studio Community 2019
User avatar
James Bott
Posts: 4654
Joined: Fri Nov 18, 2005 4:52 pm
Location: San Diego, California, USA
Contact:

Post by James Bott »

Tim,

>I have a Comment button that runs a macro...

It sounds very powerful. For me, I find UE's templates adequate for my needs.

James
Post Reply