ADO RDD xHarbour

[AHF]

Antonio,

I dont have incremental search in my xbrowse.
Could email me only that function?

[lucasdebeltran]

Antonio,

So APPEND BLANK and REPLACE FIELD WITH.. do not work already?.

Thank you.

[AHF]

Lucas,

It might work but those functions were already written by others and not fully tested.

In our small trials it worked but i cant assure.

Append blank seems to work.

[Antonio Linares]

Antonio,

I just sent an email to Rao asking him for the code to provide you

[lucasdebeltran]

Antonio,

When trying to compile with Harbour 3.2.0dev (r1412151448), there are some errors:


lucas.prg(215) Warning W0001 Ambiguous reference 'CSTR'

lucas.prg(216) Warning W0001 Ambiguous reference 'CSTR'

lucas.prg(216) Warning W0001 Ambiguous reference 'CSTR'

lucas.prg(216) Warning W0001 Ambiguous reference 'CSTR'

lucas.prg(217) Warning W0001 Ambiguous reference 'CSTR'

lucas.prg(220) Warning W0001 Ambiguous reference 'CSTR'

lucas.prg(331) Warning W0001 Ambiguous reference 'UR_FI_FLAGS'

lucas.prg(332) Warning W0001 Ambiguous reference 'UR_FI_STEP'

lucas.prg(759) Warning W0001 Ambiguous reference 'N'

lucas.prg(760) Warning W0001 Ambiguous reference 'N'

lucas.prg(761) Warning W0001 Ambiguous reference 'N'

lucas.prg(932) Warning W0001 Ambiguous reference 'N'

lucas.prg(934) Warning W0001 Ambiguous reference 'N'

lucas.prg(937) Warning W0001 Ambiguous reference 'N'

lucas.prg(940) Warning W0001 Ambiguous reference 'N'

lucas.prg(947) Warning W0001 Ambiguous reference 'N'

lucas.prg(1092) Error E0030 Syntax error "syntax error at 'IN'"

lucas.prg(1108) Error E0030 Syntax error "syntax error at 'ENDIF'"

lucas.prg(1148) Error E0017 Unclosed control structure 'IF'

lucas.prg(1188) Error E0030 Syntax error "syntax error at 'IN'"

lucas.prg(1189) Warning W0001 Ambiguous reference 'Y'

lucas.prg(1191) Warning W0001 Ambiguous reference 'Y'

lucas.prg(1191) Warning W0001 Ambiguous reference 'Y'

lucas.prg(1194) Error E0030 Syntax error "syntax error at 'ELSE'"

lucas.prg(1198) Error E0030 Syntax error "syntax error at 'ENDIF'"

lucas.prg(1221) Error E0017 Unclosed control structure 'IF'

lucas.prg(1230) Warning W0001 Ambiguous reference 'WA_INDEXEFOR'

lucas.prg(1265) Warning W0001 Ambiguous reference 'CSQL'

lucas.prg(1266) Warning W0001 Ambiguous reference 'CSQL'

lucas.prg(1266) Warning W0001 Ambiguous reference 'CSQL'

lucas.prg(1268) Warning W0001 Ambiguous reference 'CSQL'

lucas.prg(1406) Warning W0001 Ambiguous reference 'YURETURN'

lucas.prg(1440) Warning W0001 Ambiguous reference 'URESULT'

lucas.prg(1444) Warning W0001 Ambiguous reference 'URESULT'

lucas.prg(1450) Warning W0001 Ambiguous reference 'URESULT'

lucas.prg(1452) Warning W0001 Ambiguous reference 'URESULT'

lucas.prg(1454) Warning W0001 Ambiguous reference 'URESULT'

lucas.prg(1488) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1494) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1501) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1502) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1506) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1507) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1517) Warning W0001 Ambiguous reference 'NLEN'

lucas.prg(1667) Warning W0001 Ambiguous reference 'HB_FT_DATETIME'

lucas.prg(1690) Error E0030 Syntax error "syntax error at 'IN'"

lucas.prg(1692) Error E0030 Syntax error "syntax error at 'ELSE'"

lucas.prg(1697) Error E0030 Syntax error "syntax error at 'ENDIF'"

lucas.prg(1705) Error E0017 Unclosed control structure 'IF'

[AHF]

Lucas,

lucas.prg(331) Warning W0001 Ambiguous reference 'UR_FI_FLAGS'

lucas.prg(332) Warning W0001 Ambiguous reference 'UR_FI_STEP'

These in xHarbour must be added to hbusrrd.ch

Code: Select all

#define UR_FI_FLAGS           6
#define UR_FI_STEP            7
#define UR_FI_SIZE            7 //eram 5 ahf 
 

If in harbour they are not needed comment them in ado_open.

All others Im correcting code I ll post it later. Nevertheless you should be able to run like that.

Code: Select all

IF UPPER(SUBSTR(cOrder,1,3)) IN aTempFiles .OR. UPPER(SUBSTR(cOrder,1,4)) IN aTempFiles

I dont know if its only in xHarbour

[lucasdebeltran]

Antonio,

IF UPPER(SUBSTR(cOrder,1,3)) IN aTempFiles .OR. UPPER(SUBSTR(cOrder,1,4)) IN aTempFiles

this only works with xHarbour.

I advise you not to code like this, as Harbour users, the majority, won´t be able to try and test it.

With your latest additions it only gives the above error.

Thank you.

[Antonio Linares]

Antonio,

Yes, please, code it compatible for both harbour and xharbour, thanks

[Antonio Linares]

Antonio,

I have emailed you the code you asked for

[AHF]

You re right Ill do that.

Thanks for the code Antonio.

[lucasdebeltran]

Master Antonio Linares,

In order to help Antonio, what is the equivalent in Harbour for IF xxxx IN aTempFiles?.

Thanks.

[AHF]

Lucas,

ascan() > 0 but you have to inverse args

[AHF]

Antonio,

ORDSCOPE is always called in pairs 1st top 2nd bot.
Thus I think DBOI_SCOPESET and DBOI_SCOPECLEAR are never called.

In order to avoid build a query and open recordset one for TOP and another for BOT I only do that after DBOI_SCOPEBOTTOM is called.

Is this the correct behaviour to be compatible with dbf ordscope?
If one use SET SCOPE TO its ok but if use only one ordscope() to define top will go wrong! I think nobody does that but you never know.
If it comes with a codeblock can we do that?

What do you think about the code leave it like that?

Code: Select all

STATIC FUNCTION ADOSCOPE(aWAdata, oRecordSet, aOrderInfo,nIndex)
 LOCAL y, cScopeExp :="", cSql :=""

   //[UR_ORI_NEWVAL] comes with actual scope top or bottom and returns the former active scope if any
   IF VALTYPE(aOrderInfo[ UR_ORI_NEWVAL ]) = "B"
      aOrderInfo[ UR_ORI_NEWVAL ] := EVAL(aOrderInfo[ UR_ORI_NEWVAL ])
   ENDIF
   
   IF EMPTY(aWAdata[WA_INDEXACTIVE]) .OR. aWAdata[WA_INDEXACTIVE] = 0 //NO INDEX NO SCOPE
      aOrderInfo[ UR_ORI_RESULT ] := NIL
      RETURN HB_FAILURE
   ENDIF
   
   y:=ASCAN( aWAData[ WA_SCOPES ], aWAData[WA_INDEXACTIVE]  )
    
   DO CASE
   CASE nIndex == DBOI_SCOPESET //never gets called noy tested might be completly wrong!
 
       IF y > 0
           aWAData[ WA_SCOPETOP ][y] := aOrderInfo[ UR_ORI_NEWVAL ]
           aWAData[ WA_SCOPEBOT ][y] := aOrderInfo[ UR_ORI_NEWVAL ]
        ELSE
           AADD( aWAData[ WA_SCOPES ],aWAData[ WA_INDEXACTIVE ])
           AADD(aWAData[ WA_SCOPETOP ],aOrderInfo[ UR_ORI_NEWVAL ])
           AADD(aWAData[ WA_SCOPEBOT ],aOrderInfo[ UR_ORI_NEWVAL ])
        ENDIF       
        aOrderInfo[ UR_ORI_RESULT ] := NIL

   CASE nIndex == DBOI_SCOPECLEAR //never gets called noy tested might be completly wrong!
   
        IF y > 0
           ADEL(aWAData[ WA_SCOPES ],y,.T.)
           ADEL(aWAData[ WA_SCOPETOP ],y,.T.)
           ADEL(aWAData[ WA_SCOPEBOT ],y,.T.)
        ENDIF       
        aOrderInfo[ UR_ORI_RESULT ] := NIL //RETURN ACUTAL SCOPETOP NIL IF NONE

   CASE nIndex == DBOI_SCOPETOP

        IF y > 0
           aOrderInfo[ UR_ORI_RESULT ] := aWAData[ WA_SCOPETOP ][y] //RETURN ACTUALSCOPE TOP
           aWAData[ WA_SCOPETOP ][y] := aOrderInfo[ UR_ORI_NEWVAL ]
           IF LEN(aWAData[ WA_SCOPEBOT ]) < y
              AADD(aWAData[ WA_SCOPEBOT ],SPACE(LEN(CVALTOCHAR(aWAData[ WA_SCOPETOP ][y])))) //THERE INST STILL A SCOPEBOT ARRAYS MUST HAVE  SAME LEN
           ENDIF      
        ELSE
           AADD(aWAData[ WA_SCOPETOP ],aOrderInfo[ UR_ORI_NEWVAL ])
           AADD(aWAData[ WA_SCOPEBOT ],SPACE(LEN(CVALTOCHAR(aWAData[ WA_SCOPETOP ][1])))) //THERE INST STILL A SCOPEBOT ARRAYS MUST HAVE  SAME LEN
           aOrderInfo[ UR_ORI_RESULT ] := ""
        ENDIF       
     
   CASE nIndex == DBOI_SCOPEBOTTOM

       IF y > 0
           aOrderInfo[ UR_ORI_RESULT ] := aWAData[ WA_SCOPEBOT ][y] //RETURN ACTUALSCOPE TOP
           aWAData[ WA_SCOPEBOT ][y] := aOrderInfo[ UR_ORI_NEWVAL ]
           IF LEN(aWAData[ WA_SCOPETOP ]) < y
              AADD(aWAData[ WA_SCOPETOP ],SPACE(LEN(CVALTOCHAR(aWAData[ WA_SCOPEBOT ][y])))) //THERE INST STILL A SCOPETOP ARRAYS MUST HAVE  SAME LEN
           ENDIF      
        ELSE
           AADD( aWAData[ WA_SCOPES ],aWAData[ WA_INDEXACTIVE ])
           AADD(aWAData[ WA_SCOPEBOT ],aOrderInfo[ UR_ORI_NEWVAL ])
           AADD(aWAData[ WA_SCOPETOP ],SPACE(LEN(CVALTOCHAR(aWAData[ WA_SCOPEBOT ][1])))) //THERE INST STILL A SCOPETOP ARRAYS MUST HAVE  SAME LEN
           aOrderInfo[ UR_ORI_RESULT ] := ""
        ENDIF       

   CASE nIndex == DBOI_SCOPETOPCLEAR
   
       IF y > 0
           aOrderInfo[ UR_ORI_RESULT ] := aWAData[ WA_SCOPETOP ][y] //RETURN ACTUALSCOPE TOP
           aWAData[ WA_SCOPETOP ][y] := SPACE(LEN(CVALTOCHAR(aWAData[ WA_SCOPEBOT ][y])))
        ELSE
           aOrderInfo[ UR_ORI_RESULT ] := "" //RETURN ACTUALSCOPE TOP IF NONE
        ENDIF       
        
   CASE nIndex == DBOI_SCOPEBOTTOMCLEAR
   
       IF y > 0
           aOrderInfo[ UR_ORI_RESULT ] := aWAData[ WA_SCOPEBOT ][y] //RETURN ACTUALSCOPE TOP
           aWAData[ WA_SCOPEBOT ][y] := SPACE(LEN(CVALTOCHAR(aWAData[ WA_SCOPETOP ][y])))
        ELSE
           aOrderInfo[ UR_ORI_RESULT ] := "" //RETURN ACTUALSCOPE TOP IF NONE
        ENDIF       

   ENDCASE

   //ONLY BUILDS QUERY AFTER ALL DONE ASSUME THAT ALWAYS CLLED IN PAIRS OTHERWISE WILL GET ERROR   
   IF nIndex = DBOI_SCOPEBOTTOM  .OR. nIndex = DBOI_SCOPEBOTTOMCLEAR .OR. nIndex = DBOI_SCOPETOPCLEAR 
   
      IF y = 0  //IF DIDNT FOUND ANY ITS THE FIRST ONE THAT JUST BEEN ADD
         y := 1
      ENDIF  
      
      IF LEN(ALLTRIM(aWAData[ WA_SCOPETOP ][y]+aWAData[ WA_SCOPEBOT ][y])) > 0
        cScopeEXp := ADOPSEUDOSEEK(aWAData[ WA_SCOPETOP ][y],aWAData,,.T.,aWAData[ WA_SCOPEBOT ][y])[2]
      ELSE
          cScopeExp :=""
      ENDIF   
      
      cSql := IndexBuildExp(aWAData[ WA_INDEXACTIVE ],aWAData,,cScopeExp)
      oRecordSet:Close()
      oRecordSet:open(cSql,aWAData[ WA_CONNECTION ])
      
   ENDIF
   
  RETURN HB_SUCCESS
 

[AHF]

New adordd with scopes and Harbour syntax https://github.com/AHFERREIRA/adordd.git

[Antonio Linares]

Antonio,

Excellent! Great work

Now we need feedback from users. How is your app behaving with it ?