FiveTech Software tech support forums

Alguien me puede decir a que se debe este error ! es solo cuando coloco
el listbox dentro de un dialogo.
el id que menciona no esta definido en ninguna parte uso pelles .rc


Application
===========
Path and name: C:\CONSUWIN\consu02.exe (32 bits)
Size: 1,421,312 bytes
Time from start: 0 hours 0 mins 5 secs
Error occurred at: 18/04/2007, 15:54:40
Error description: Error FiveWin/1 Non defined Id: No: 103

Stack Calls
===========
Called from: CONTROL.PRG => TCONTROL:INITIATE(0)
Called from: WBROWSE.PRG => (b)TWBROWSE:TWBROWSE(596)
Called from: WBROWSE.PRG => TWBROWSE:INITIATE(0)
Called from: => __OBJSENDMSG(0)
Called from: HARBOUR.PRG => OSEND(0)
Called from: HARBOUR.PRG => ASEND(0)
Called from: DIALOG.PRG => TDIALOG:INITIATE(0)
Called from: DIALOG.PRG => TDIALOG:HANDLEEVENT(0)
Called from: => DIALOGBOX(0)
Called from: DIALOG.PRG => TDIALOG:ACTIVATE(0)
Called from: CONSU02.PRG => MBUSCA(0)
Called from: CONSU02.PRG => (b)LIQUI(0)
Called from: BUTTON.PRG => TBUTTONBMP:CLICK(0)
Called from: BUTTON.PRG => TBUTTON:HANDLEEVENT(0)
Called from: BUTTONB.PRG => TBUTTONBMP:HANDLEEVENT(0)
Called from: WINDOW.PRG => _FWH(0)
Called from: => SENDMESSAGE(0)
Called from: DIALOG.PRG => TDIALOG:COMMAND(0)
Called from: WINDOW.PRG => TWINDOW:HANDLEEVENT(0)
Called from: DIALOG.PRG => TDIALOG:HANDLEEVENT(0)
Called from: => DIALOGBOX(0)
Called from: DIALOG.PRG => TDIALOG:ACTIVATE(0)
Called from: CONSU02.PRG => LIQUI(0)
Called from: CONSU02.PRG => (b)PMENU1(0)
Called from: BUTTON.PRG => TBUTTONBMP:CLICK(0)
Called from: BUTTON.PRG => TBUTTON:HANDLEEVENT(0)
Called from: BUTTONB.PRG => TBUTTONBMP:HANDLEEVENT(0)
Called from: WINDOW.PRG => _FWH(0)
Called from: => SENDMESSAGE(0)
Called from: DIALOG.PRG => TDIALOG:COMMAND(0)
Called from: WINDOW.PRG => TWINDOW:HANDLEEVENT(0)
Called from: DIALOG.PRG => TDIALOG:HANDLEEVENT(0)
Called from: => DIALOGBOX(0)
Called from: DIALOG.PRG => TDIALOG:ACTIVATE(0)
Called from: CONSU02.PRG => PMENU1(0)
Called from: CONSU02.PRG => (b)MAIN(0)
Called from: TOOLBAR.PRG => TTOOLBAR:COMMAND(0)
Called from: WINDOW.PRG => TWINDOW:COMMAND(0)
Called from: WINDOW.PRG => TWINDOW:HANDLEEVENT(0)
Called from: WINDOW.PRG => _FWH(0)
Called from: => WINRUN(0)
Called from: WINDOW.PRG => TWINDOW:ACTIVATE(0)
Called from: CONSU02.PRG => MAIN(0)

System
======
CPU type: AMD Athlon(tm) 64 Processor 3200+ 2200 Mhz
Hardware memory: 960 megs

Free System resources: 90 %
GDI resources: 90 %
User resources: 90 %

Compiler version: xHarbour build 0.99.61 Intl. (SimpLex)
Windows version: 5.1, Build 2600 Service Pack 2

Pablo:

Puede ser que el ID 103 no este definido en tu .RC pero si parece
que esta definido en tu prg.

Saludos.

Ruben Fernandez.