Utilitario DBF2SQL

[metaldrummer]

Hola Raymundo,

Enviado a tu correo. Pruebalo y me comentas.

Saludos,

jajaja....no me había fijado en tu link un poco más arriba
gracias

[anserkk]

Ver 2.5, When I select a DBF,I am getting this run time error. Variable does not exist NPOS


Anser

[Kleyber]

Anser,

There is a version 2.6. To whose is interested that's the link to download: http://www.megaupload.com/?d=PEPVSG7V

Test it and tell me about your results.

Best Regards,

SET SPANISH ON

Existe ahora la versión 2.6. Para quien esté interesado, el link para descarga es: http://www.megaupload.com/?d=PEPVSG7V

Testenlo y me comenten los resultados.

Saludos

[Patricio Avalos Aguirre]

hola

ya no esta disponible el archivo

El archivo al que está intentando acceder no está dsiponible temporalmente. Por favor, inténtelo de nuevo más tarde.

[Kleyber]

Patricio,

Acabo de testar aqui y me funciona normalmente.

[nnicanor]

Señores

Al intentar usarlo me genera el siguiente error al seleccionar las tablas, ninguna tiene indice.


Dados do erro causado pela Aplicação

No aplication name. Error after create main Window.
________________________________________________________________________________

Pasta e nome :
Path de dados :
Usuário do Sistema :
Tipo de aplicação : 32 bits
Versão do Compilador : xHarbour build 1.1.0 Intl. (SimpLex)
FWHX 8.02 (c) FiveTech Software, 1993-2008



Tamanho do executável :
Data e Hora do erro : 15/03/2011, 11:55:58

Descrição do erro produzido
________________________________________________________________________________

Error BASE/1132 Bound error: array access
Argumentos :
[ 1] = A { ... }
[ 2] = N 0

Chamadas a Stack
________________________________________________________________________________

Called from TRADMENU:REFRESH(0)
Called from MUDA_HOST(350)
Called from (b)MAIN(228)
Called from TDBCOMBO:CHANGE(0)
Called from TCONTROL:HANDLEEVENT(0)
Called from TDBCOMBO:HANDLEEVENT(0)
Called from _FWH(0)
Called from SENDMESSAGE(0)
Called from TDIALOG:COMMAND(0)
Called from TWINDOW:HANDLEEVENT(0)
Called from TDIALOG:HANDLEEVENT(0)
Called from DIALOGBOX(0)
Called from TDIALOG:ACTIVATE(0)
Called from MAIN(262)

Informação del sistema. SysStatus()
________________________________________________________________________________

Versão do Windows : Unknown Windows version Professional
Número da versão : 6.1.7600
Pasta do Windows : C:\windows
Pasta de System : C:\windows\system32

Processador do sistema.
________________________________________________________________________________

GenuineIntel Intel64 Family 6 Model 37 Stepping 2
Tipo Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz ou Superior
Velocidade 2270 MHz
Placa Base Multiprocessador
BIOS TOSINV - 1InsydeH2O Version 1.40 05/19/10

Informação da Memória
________________________________________________________________________________

Memoria RAM Real 2934 MB Disponível 1309 MB
Memória Virtual 2047 MB Disponível 1950 MB
Paginação de Arquivos 4095 MB Disponível 3070 MB

Memoria estática.
Segmento de dados : 64k
Tamanho inicial : 0 bytes (SYMP=0, Stack=0, Heap=0)
Stack do Programa : 63253 bytes
Variáveis estáticas 163 : 2282 bytes

Consumo de memória dinâmica.
Valor atual : 0 bytes
Maior possivel : 0 bytes

Recursos disponiveis.
Recursos do Sistema : 90 %
Recursos gráficos GDI : 90 %
Recursos do Usuario : 90 %


Slds

NMM

[nnicanor]

Perdon,

El mensaje de error es el siguiente:

Dados do erro causado pela Aplicação

No aplication name. Error after create main Window.
________________________________________________________________________________

Pasta e nome :
Path de dados :
Usuário do Sistema :
Tipo de aplicação : 32 bits
Versão do Compilador : xHarbour build 1.1.0 Intl. (SimpLex)
FWHX 8.02 (c) FiveTech Software, 1993-2008

Tamanho do executável :
Data e Hora do erro : 15/03/2011, 14:19:49

Descrição do erro produzido
________________________________________________________________________________

Error BASE/1003 Variable does not exist: NPOS

Chamadas a Stack
____________________________________________________________

[Kleyber]

Hola,

Este error acontece con la versión 2.6?

[anserkk]

hola

ya no esta disponible el archivo

El archivo al que está intentando acceder no está dsiponible temporalmente. Por favor, inténtelo de nuevo más tarde.

I also received the same error message from MegaUpload web site

"The file you are trying to access is temporarily unavailable. Please try again later."

After several tries, I got the download link and downloaded the file. After downloading the file, I tried once again to download and was unsuccessful. It seems that there is a problem with the site.

Anyway I have uploaded the file to Rapidshare also and here is the link http://rapidshare.com/files/452767273/dbf2sql-2.6.zip

Anser,
Test it and tell me about your results.
Best Regards,

Thank you. Worked perfectly. There was an error, but it was because one of my DBF's filename was Group.DBF and the name "Group" is a reserved keyword. I changed the name of my DBF and then it worked perfectly.

It's a very good application.

Anser

[Kleyber]

Anser,

Thanks for sharing your results.

Regards,

[dutch]

Dear Kleyber,

Is it distributing the tool now?
If so, thank you in advance,

Regards,
Dutch
dutch@easyfo.com
dutchez4@gmail.com

[Kleyber]

Dutch,

Yes, just go to my site http://www.tkinformidia.net, link DOWNLOADS.

[dutch]

Dear Kleyber,

Thank you so much. It works great.

Regards,
Dutch

[J. Ernesto]

Amigos del foro, alguien tiene una versión de este utilitario, o desde donde lo puedo descargar, u otro programa para pasar de dbf a sql.

Saludos

[Kleyber]

Amigos del foro, alguien tiene una versión de este utilitario, o desde donde lo puedo descargar, u otro programa para pasar de dbf a sql.

Saludos

Just go to my site http://www.tkinformidia.net, link DOWNLOADS.