FiveTech Software tech support forums

Hello,

Can xharbour work with gcc (mingw)? Or is that only possible with harbour?

Pieter

Pieter,

I don't know if xharbour supports MinGW.

Surely Enrico may help us on this

Yes, it is on

http://www.whosaway.com

EMG

Enrico, Oké!, I have send an email to you. Pieter

Hello ,

I have downloaded from http://www.whosaway.com/:
-mingw530.zip
-xhb10146_mingw53.zip

I want to compile and run a helloworld.prg program on operating system Windows 8
I made this directory:
C:\XharbourWithMingwTestProgram
mingw530
xhb10146_mingw53
build-helloworld.bat (is now still an empty file)
helloworld.prg

Question: What is a good way to compile and run helloworld.prg?

I tried to understand mdir.bat (in C:\XharbourWithMingwTestProgram\xhb10146_mingw53\xharbour\winmake), but I am not sure whether this mdir.bat is good file to start with.

Does anybody have an idea?

Best regards,

Pieter

Pieter,

Please review FWH\samples\buildg.bat to use MinGW

You can easily modify it to use it with xHarbour

Antonio, Thanks,

I have modified buildg.bat:

if "%fwh%" == "" set fwh=C:\XharbourWithMingwTestProgram\fwh

set hdir=C:\XharbourWithMingwTestProgram\xhb10146_mingw53\xharbour
set hdirc=%hdir%\bin\harbour.exe
set hlibs=%hdir%\lib\gcc
set mingw=C:\XharbourWithMingwTestProgram\mingw530\MINGW530
set path=C:\XharbourWithMingwTestProgram\mingw530\MINGW530\bin

┌────────────────────────────────────────────────────────────────────────────┐
?FiveWin for Harbour 15.01 and GCC - Jan. 2015 Harbour development power │▄
?(c) FiveTech, 1993-2015 for Microsoft Windows 9X/NT/200X/ME/XP/Vista/7/8 │█
└────────────────────────────────────────────────────────────────────────────┘?
  ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀?
Compiling...
xHarbour 1.2.3 Intl. (SimpLex) (Build 20160314)
Copyright 1999-2015, http://www.xharbour.org http://www.harbour-project.org/
Compiling 'helloworld.prg' and generating preprocessed output to 'helloworld.ppo
'...
Generating C source output to 'helloworld.c'...
Done.
Lines 5, Functions/Procedures 1, pCodes 7
gcc: error: unrecognized command line option '-mno-cygwin'
* Link errors *

C:\XharbourWithMingwTestProgram>

I think the problem is with set hlibs=%hdir%\lib\gcc, I don't see a gcc directory in C:\XharbourWithMingwTestProgram\xhb10146_mingw53\xharbour\lib

Is this the problem?

Pieter

Long time ago ( 2008 !!! )
I tested MingW with Antonio to get it working
have a look at my results, posted problems and samples

http://forums.fivetechsupport.com/viewt ... ilit=MingW

The project for testing
http://www.pflegeplus.com/DOWNLOADS/BRWtoolsMinGW2.zip
best regards
Uwe

Hello ukoenig:D, thank you. So something did worked:D, was it fivewin with harbour and/or xharbour?

I know that harbour works very well with mingw(it is very easy with hbmk2). I now want to get xharbour working with mingw(It not really neccesary to use fivewin for that at this moment)

I see mno-cygwin is missing. (unrecognized command line option '-mno-cygwin')

In buildg.bat: (see -mno-cygwin)
if not exist %1.rc %mingw%\bin\gcc -o%1.exe %1.o -Wall -s -mwindows -L%mingw%\lib -L%hlibs% -L%fwh%\lib -mno-cygwin -Wl,--start-group -lfivehg -lfivehgc -lgtgui -luser32 -lwinspool -lkernel32 -lcomctl32 -lcomdlg32 -lgdi32 -lgdiplus -lole32 -loleaut32 -lpsapi -loledlg -lmfcuia32 -lmsimg32 -lwin32k -lstdc++ -lversion -luuid -lwinmm -lvfw32 -lwsock32 -lshell32 -lhbcommon -lhbcpage -lhbcplr -lhbct -lhbdebug -lhbhsx -lhblang -lhbmacro -lhbmainstd -lhbmzip -lodbc32 -lhbpcre -lhbpp -lhbrdd -lhbrtl -lhbsix -lhbsqlit3 -lhbtip -lhbusrrdd -lhbvm -lhbwin -lhbzlib -lrddcdx -lrddfpt -lrddntx -lxhb -lpng -Wl,--end-group

Does anybody know if I have do someting with cygwin? I thougth I have to do something with MingW.

Pieter

Pieter,

all my tests are done with XHARBOUR.
I will have a closer look at my old tests and check with NEW fwh.

regards
Uwe

Pieter,

Please replace this:

I think the problem is with set hlibs=%hdir%\lib\gcc

with this:

set hlibs=%hdir%\lib

Antonio,

I did set hlibs=%hdir%\lib

Still the same error.

┌────────────────────────────────────────────────────────────────────────────┐
?FiveWin for Harbour 15.01 and GCC - Jan. 2015 Harbour development power │▄
?(c) FiveTech, 1993-2015 for Microsoft Windows 9X/NT/200X/ME/XP/Vista/7/8 │█
└────────────────────────────────────────────────────────────────────────────┘?
  ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀?
Compiling...
xHarbour 1.2.3 Intl. (SimpLex) (Build 20160314)
Copyright 1999-2015, http://www.xharbour.org http://www.harbour-project.org/
Compiling 'helloworld.prg' and generating preprocessed output to 'helloworld.ppo
'...
Generating C source output to 'helloworld.c'...
Done.
Lines 5, Functions/Procedures 1, pCodes 7
gcc: error: unrecognized command line option '-mno-cygwin'
* Link errors *

C:\XharbourWithMingwTestProgram>

In hlibs=%hdir%\lib there are only .a extensions:
libbmdbfcdx.a
libbmsixcdx.a
libcodepage.a
etc.

I will think further:D

Pieter

Pieter,

Remove the flag '-mno-cygwin' when calling gcc

Antonio,

I already tried that, I get this error.

┌────────────────────────────────────────────────────────────────────────────┐
?FiveWin for Harbour 15.01 and GCC - Jan. 2015 Harbour development power │▄
?(c) FiveTech, 1993-2015 for Microsoft Windows 9X/NT/200X/ME/XP/Vista/7/8 │█
└────────────────────────────────────────────────────────────────────────────┘?
  ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀?
Compiling...
xHarbour 1.2.3 Intl. (SimpLex) (Build 20160314)
Copyright 1999-2015, http://www.xharbour.org http://www.harbour-project.org/
Compiling 'helloworld.prg' and generating preprocessed output to 'helloworld.ppo
'...
Generating C source output to 'helloworld.c'...
Done.
Lines 5, Functions/Procedures 1, pCodes 7
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbcommon
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbcpage
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbcplr
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbct
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbdebug
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbhsx
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhblang
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbmacro
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbmainstd
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbpcre
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbpp
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbrdd
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbrtl
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbtip
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbusrrdd
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbvm
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbwin
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lhbzlib
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lrddcdx
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lrddfpt
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lrddntx
C:/XharbourWithMingwTestProgram/mingw530/MINGW530/bin/../lib/gcc/i686-w64-mingw3
2/5.3.0/../../../../i686-w64-mingw32/bin/ld.exe: cannot find -lxhb
collect2.exe: error: ld returned 1 exit status
* Link errors *

C:\XharbourWithMingwTestProgram>

But maybe this error is closer to the solution.

Pieter

Pieter,

Please post here your modified batch file