visual report designer

User avatar
tnhoe
Posts: 83
Joined: Tue Nov 08, 2005 11:09 am
Location: Malaysia
Contact:

visual report designer

Post by tnhoe »

Hi,

In response to Julian's mail, I make an VisualFoxpro exe to be called from Fivewin, for visual report design, it supports dbf/cdx only.

Just edit report.dbf & reportdb.dbf will do, refer to readme.txt

I upload it to :-
http://hyperupload.com/download/01dc58d ... t.zip.html

require VFP7 runtimes dll (roaylty free distributed) :-
http://hyperupload.com/download/022a635 ... 7.zip.html
Regards

Hoe, email: easywin3@yahoo.com
User avatar
AIDA
Posts: 782
Joined: Fri Jan 12, 2007 8:35 pm

HOLA

Post by AIDA »

YA LA BAJE Y CONSEGUI LAS dll QUE FALTAN

SI ESTA MUY BUENO :D

GRACIAS :wink:
Que es mejor que programar? creo que nada :)
Atropellada pero aqui ando :P

I love Fivewin

séʌǝɹ ןɐ ɐʇsǝ opunɯ ǝʇsǝ
User avatar
Antonio Linares
Site Admin
Posts: 37481
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain
Contact:

Post by Antonio Linares »

Hoe,

This file is no longer available:
require VFP7 runtimes dll (roaylty free distributed) :-
http://hyperupload.com/download/022a635 ... 7.zip.html

Could you please upload it again ? thanks,
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Manuel Valdenebro
Posts: 706
Joined: Thu Oct 06, 2005 9:57 pm
Location: Málaga-España

Post by Manuel Valdenebro »

Antonio Linares wrote:This file is no longer available
Antonio,

You can download from this address:

ftp://ftp.prolib.de/public

You would select VFP7SPORT.EXE and after install it in your computer.

It is a good solution. I am translating this message in spanish forum too.
Un saludo

Manuel
User avatar
Antonio Linares
Site Admin
Posts: 37481
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain
Contact:

Post by Antonio Linares »

Manuel,

Thanks! :-)
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
AIDA
Posts: 782
Joined: Fri Jan 12, 2007 8:35 pm

visual report designer

Post by AIDA »

Hola ya subí los archivos para este reporteador :D
realmente funciona a un que yo no lo use pero para los que les interese aquí esta el archivo report.zip adentro de el esta el vfp7.zip

http://ezuploads.info/dll/sy9zt7


Saluditos :wink:

Aída
Que es mejor que programar? creo que nada :)
Atropellada pero aqui ando :P

I love Fivewin

séʌǝɹ ןɐ ɐʇsǝ opunɯ ǝʇsǝ
User avatar
tnhoe
Posts: 83
Joined: Tue Nov 08, 2005 11:09 am
Location: Malaysia
Contact:

Re: visual report designer

Post by tnhoe »

hi, Antanio & all,

I have uploaded it here for your download :

http://re.com.my

- foxreport.zip : called by fivewin winexec()
- vfp9dll.exe : runtime dlls

There is readme.txt included.

Thank you & Regards
Hoe
Regards

Hoe, email: easywin3@yahoo.com
User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

Re: visual report designer

Post by Otto »

Only to be curious what advantages do you see using "visual report designer" over FIVEWIN report designer EasyReport?

Thanks in advance
Otto
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org

********************************************************************
User avatar
tnhoe
Posts: 83
Joined: Tue Nov 08, 2005 11:09 am
Location: Malaysia
Contact:

Re: visual report designer

Post by tnhoe »

Hi, Otto,

I first use visual report designer in 2004 or earlier. as a free and quick solution to design/preview report on the fly, and by that time Fivewin EasyReport still not available yet.

I haven't try latest Fivewin EasyReport and can't compare both.

Regards
Hoe
Regards

Hoe, email: easywin3@yahoo.com
User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

Re: visual report designer

Post by Otto »

Hello Hoe,

I feel there is not much missing in EasyReport.
Give it a new try. Most sources are there too.

It's a pity that not more FIVEWINNERs are using EasyReport. So much energies are lost if everyone searches another solution and further development of EasyReport is suffering.

I myself tried many solution, too but I must say for “everyday” reports EasyReport is very good.

If you have to distribute solutions with extern reports you always have to install dlls, ocxs, etc. :
foxreport.zip : called by fivewin winexec()
- vfp9dll.exe : runtime dlls
With CR sometimes I had to install the full version of CR to get it going.

This is a big disadvantage.

My WINHOTEL runs on every WINDOWS PC from a USB stick.
There is no installation necessary. You can plug in the stick and start working.
Fivewin is real plug and play.

Regards,
Otto
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org

********************************************************************
User avatar
Kleyber
Posts: 581
Joined: Tue Oct 11, 2005 11:28 am
Location: São Luiz, Brasil

Re: visual report designer

Post by Kleyber »

Hi Otto,

I'm wondering... I never user Easyreport, but, is there a possibility to create a report for dot-matrix printers (I mean, using ONLY the dot-matrix fonts) and show a preview of this report? I'm asking this because I have this kind of problem using TDosprn for dot-matrix printers, and I haven`t seen any report creator generating this kind of option.

Regards,
Kleyber Derick

FWH / xHb / xDevStudio / SQLLIB
User avatar
Otto
Posts: 4470
Joined: Fri Oct 07, 2005 7:07 pm
Contact:

Re: visual report designer

Post by Otto »

Hello Kleber,

I don’t know if ER works for DOS printers.
I do my DOS printing the hardcoded way.


But for windows printing it is very fine. Also the designer is easy to use.
Endusers are able to change some features themselves.

The printing is organized in so called PRINTAREAS.

For example you have a PRINTAREA for the header one for the footer and one for the positions.

The reports are stored in TXT-files for each Printarea one.
So you can manipulate also the txt files to change the reports.

And it is very easy to pass data to the report because you handle all in your source code in FIVEWIN.


Regards,
Otto
Image
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org

********************************************************************
User avatar
Kleyber
Posts: 581
Joined: Tue Oct 11, 2005 11:28 am
Location: São Luiz, Brasil

Re: visual report designer

Post by Kleyber »

Well, I see that previewing a DOS report is not so easy. Anyway, thanks for all informations.

Regards,
Kleyber Derick

FWH / xHb / xDevStudio / SQLLIB
User avatar
anserkk
Posts: 1280
Joined: Fri Jun 13, 2008 11:04 am
Location: Kochi, India

Re: visual report designer

Post by anserkk »

Dear Kleyber,

For Dos mode printing and preview, have u tried the class TDosPrn ? It gives a preview too. I have modified the class a little bit more to check for network dot matrix printers and I have posted it in the spanish forum.

Regards

Anser
User avatar
Silvio
Posts: 3107
Joined: Fri Oct 07, 2005 6:28 pm
Location: Teramo,Italy

Re: visual report designer

Post by Silvio »

I have a mini visual report designer
it save all form in a ini file

the last one problems is I must create areas and I not Know How make it

Now I am working to insert it on visual designer of fivetech as U can see here :
http://forums.fivetechsupport.com/viewt ... =5&t=13965

But I am only one and this work must be made from a pool of men not fron one man
Best Regards, Saludos

Falconi Silvio
Post Reply